English
中文简体1. The outside is covered with metal mesh. Since the frame of China swimming pool filter cartridges manufacturers is only the upper and lower end covers, this metal mesh structure is used to prevent the filter screen from being damaged. Of course, the resistance structure should also be considered. If the metal mesh is not used, special attention should be paid to the transportation.
2. The second layer from the outside to the inside is usually the pre filter layer, which can filter some large particles from the back to the high efficiency filter, reducing the burden of HEPA filter screen. Considering the resistance structure, it can also be omitted.
3. The third layer is HEPA filter screen, which has been pleated to expand the spread area of filter paper and increase the dust capacity of HEPA layer. The service life is relatively prolonged.
4. The fourth layer is a formaldehyde and VOC removal filter layer. Indoor pollution is not limited to particulate matter or haze. There is also odor, formaldehyde or organic gas volatiles. Therefore, in the fourth layer, activated carbon filter screen is generally used, and the effect of ordinary activated carbon on formaldehyde in the market is very ordinary. At this time, activated Dryer Lint Filters Manufacturers need to modify the raw materials of activated carbon to increase its filtering efficiency.
Feature
Powerful Filtering Performance- Innovative "dirt locking" technology enables the fabric to capture more pollutants than ordinary fabrics. The filter can effectively remove hair, leaves, dust, sediment, sand, etc.
It is a must-have for any above-ground swimming pool up to 2,400 gallons.
Improve Cleaning Efficiency- The filter only uses lead-free and BPA-free material end caps, and uses a 50% open free-flowing core to maximize water flow, thereby greatly reducing the time and frequency of filter cleaning.
Long Lifespan-Premium pleated fabric is durable in the harshest conditions. Even with significant debris buildup, our filters are designed to maintain maximum flow rates throughout the season. Cleaning the filter is easily done by removing and washing with water. Filter service life is around 1-2 years with proper maintenance.
Keep The Water Fresh: This Type VI filter for SaluSpa is sure to keep your pure spa jet massage water clean and fresh. It apply to most massage pools.
